Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Canoga Park Homeowners
A cracked chimney crown, loose mortar joints, or a flue tile that’s spalled away doesn’t fix itself, and it gets worse every time it rains. Chimney repair in Canoga Park means restoring those failing components before water gets into the masonry and the damage moves from the cap down toward your ceilings. Our technicians have up to 15 years of experience, and we inspect before we sweep so you know exactly what’s wrong and why it matters. When the problem is urgent, we can often schedule same-day repair. Call (844) 443-4582 and we’ll get a free estimate on the calendar.
What Our Chimney Repair Service Includes
Chimney repair covers every part of the structure above the firebox: the masonry, the crown, the flashing, the flue. We handle all of it, which means you’re not chasing down a mason, a roofer, and a sweep to close out one job. Here’s what each piece of work involves.
Mortar Repointing
Repointing is the process of grinding out failed mortar between bricks and packing fresh mortar into those joints. You need it when the joints have gone crumbly, sandy, or recessed, which lets water in and eventually lets bricks shift. We match the mortar mix to the brick so the repair doesn’t look like a scar, and we don’t just smear new mortar over old.
Spalling Brick Repair
Spalling is when the face of a brick flakes off or pops, usually after water gets in and expands as it dries. You’ll spot it as brick dust and chips on the roof or the ground below the chimney. We replace the affected bricks rather than patching the surface, because a cosmetic cover over a spalled brick traps moisture and keeps the damage going.
Chimney Waterproofing
Waterproofing is a vapor-permeable sealer applied to the exterior masonry so rain beads off while the brick still breathes. It’s the right move for a chimney with sound brick but a history of dampness, especially in the rainy stretch of a Canoga Park winter. Sealing won’t fix active spalling or bad mortar; we tell you that plainly instead of selling a coat of sealer as a cure.
Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof, and it’s the most common source of leaks that get blamed on the chimney itself. If you see staining on the ceiling near the chimney or rust streaks down the masonry, the flashing is the first place we look. We repair or reset the flashing and seal the counter-flashing into the brick so the roof-to-chimney connection is tight.
Chimney Rebuilding
Rebuilding is what happens when the damage runs deeper than the surface – a chimney that has leaned, or one whose top courses have broken down past the point of repointing. We take the chimney down to solid masonry and rebuild it with new brick, a proper crown, and correct flashing tie-in. This is the most involved repair we do, and it’s the honest answer when patching would only buy a year or two.
Tuckpointing
Tuckpointing is a finer version of repointing, where the joint is tooled and finished to a specific profile and color so the repair blends with the surrounding brick. It’s the right choice on a visible chimney face where appearance matters as much as weather tightness. We work the joint profile to match the existing masonry rather than leaving a flat, obvious stripe of new mortar.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Repair
We work with a curated set of professional-grade materials, and that matters because a repair is only as good as what goes into it. For flue resurfacing we use the HeatShield system, which restores deteriorated flue tiles without a full reline – a capability most sweep-only companies simply don’t have. On the exterior, we install chimney caps and crown solutions from Gelco and Famco, and we source professional-specification parts through Olympia Chimney so the components match the job rather than whatever happens to be on a shelf.
Whether your chimney has a HeatShield-resurfaced flue, a Gelco cap that’s seen better days, a Famco crown that’s cracked through, or any other make, we can help. We’ve worked with enough of these systems to know where each one tends to wear first, and we’ll tell you whether a component can be repaired or needs replacing.
Signs You Need Chimney Repair Right Now
Some chimney problems announce themselves. Others sit quietly for a season and then show up as a water stain on the ceiling. Here’s what to watch for.
- Crumbling mortar joints. If you can scrape mortar out with a screwdriver or it’s washing out onto the roof, the joints have failed. That’s a repointing job before the bricks above start to move.
- Flaking or popping brick faces. Spalling brick and grit on the roof mean water is working into the masonry. It won’t stop on its own, and the longer it goes, the more brick has to come out.
- Water stains or dampness near the chimney. Ceiling discoloration, rust on the firebox, or a damp smell after rain usually points to flashing, crown, or cap failure. Catching the source early keeps a small fix from becoming a rebuild.
- A cracked or crumbling crown. The crown sheds water away from the flue, and once it cracks, water goes straight down into the masonry. A crown is far cheaper to replace than the chimney it protects.
- A leaning or visibly damaged chimney. A chimney that’s tilting, has lost bricks from the top, or shows a gap at the roofline needs a real look. That’s the point where rebuilding gets discussed honestly instead of patched over.
Our Chimney Repair Process – Step by Step
We follow the same sequence on every job so you know what’s happening and why. Nothing gets recommended without evidence you can look at yourself.
- 1
Inspection first. We look at the firebox, flue, crown, cap, flashing, and exterior masonry before anyone picks up a tool. A camera inspection gives us a view of the flue interior, and you get photos of what we find.
- 2
Photo report and written findings. We show you the problem areas, explain what each one means, and separate the work that’s urgent from the work that can safely wait a season.
- 3
Written estimate. You get a flat-price quote for the repair, agreed before we book the work. No surprise add-ons once the job starts.
- 4
The repair itself. We match mortar and brick to the existing chimney, install professional-spec caps or crowns where needed, and keep the work area protected while we’re on the roof.
- 5
Final walk-through. We show you the finished repair, confirm the flashing and crown are shedding water correctly, and leave you with the record of what was done.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Canoga Park?
Chimney repair in Canoga Park typically runs from around $250 for a small flashing or cap fix up to several thousand dollars for a partial rebuild, depending on how much masonry is involved. A typical mortar repointing job on a standard chimney runs $450 to $1,200 depending on how many joints have failed and how high the work is. Spalling brick repair usually lands in the $600 to $1,500 range based on the number of bricks replaced. Chimney waterproofing is commonly $350 to $800, and flashing repair runs $300 to $900 depending on the roof pitch and access. A partial chimney rebuild is the big-ticket item, typically $2,500 to $6,000 or more when the top courses come down.
| Repair | Typical Estimate |
|---|---|
| Flashing repair | $300 – $900 |
| Chimney waterproofing | $350 – $800 |
| Mortar repointing / tuckpointing | $450 – $1,200 |
| Spalling brick repair | $600 – $1,500 |
| Partial chimney rebuild | $2,500 – $6,000+ |
What drives the price is access and height, how much of the chimney is affected, the cost of matching brick and mortar, and whether the flue itself needs resurfacing. You avoid overpaying by getting the inspection report and photos first, so you’re paying for the repair that’s actually needed rather than the biggest one on the menu. Our estimate is free and the written quote sets the final price.
Chimney Repair Near Canoga Park – Our Service Area
We work throughout the west San Fernando Valley, including Winnetka, Reseda, Woodland Hills, West Hills, and Porter Ranch, along with Chatsworth, Northridge, Tarzana, Hidden Hills, Bell Canyon, and Santa Susana. Most jobs in these neighborhoods are scheduled within a few days, and we’ll tell you honestly where you fall on the calendar. If a chimney in Winnetka needs chimney repair or one in West Hills has the same flashing problem, the process is the same: inspect, show you the evidence, quote it flat, then fix it.
Serving Canoga Park, CA – Our Local Coverage Area
We serve Canoga Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Repair in Canoga Park
Chimney repair covers the structural and masonry side of the chimney: repointing, spalling brick replacement, waterproofing, flashing, crown and cap work, and rebuilding. It’s distinct from sweeping, which clears creosote, and from a reline, which addresses the flue interior. A repair restores a component that has failed or is failing. Call (844) 443-4582 for a free estimate and we’ll tell you which category your issue falls into.
Most small repairs, like flashing or a cap replacement, finish in a few hours. Repointing and spalling brick work typically take a day, and a partial rebuild can run several days depending on weather and curing time. We give you a realistic timeline with the written estimate rather than promising a same-day finish on a job that can’t deliver one.
Typical estimates here range from about $300 for flashing up to $6,000 or more for a partial rebuild, with repointing and spalling work in the $450 to $1,500 band. The final price depends on height, access, and how much masonry is affected. Our estimate is free and written, and it sets the price before we start. Call (844) 443-4582 for an exact quote.
Yes. We use the HeatShield resurfacing system for deteriorated flue tiles and install Gelco and Famco caps and crowns, sourcing professional-spec parts through Olympia Chimney. We know where these systems tend to wear and we’ll tell you whether a component can be repaired or needs replacing. Whether your chimney has one of these or any other make, we can help.
Same-day repair is often possible when the schedule allows, and we’ll tell you straight if it doesn’t. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 443-4582 and we’ll find the earliest slot for your Canoga Park chimney.
We stand behind the repairs we make, and we use professional-grade materials from HeatShield, Gelco, Famco, and Olympia Chimney so the work lasts the way it should. The terms of our workmanship guarantee are spelled out in writing with your estimate, so you know exactly what’s covered. If something we repaired acts up, call us and we’ll come back out to look at it.
Clear the area around the fireplace and make sure we can reach the roof without obstruction, and let us know about any pets or gates. If you’ve seen water stains or spalling, point them out when we arrive so we include them in the inspection. You don’t need to move furniture from the whole room, just the immediate hearth area. Call (844) 443-4582 to schedule and we’ll confirm the rest.
Schedule Your Chimney Repair Service in Canoga Park Today
If you’ve spotted crumbling mortar, a cracked crown, or a leak near your Chimney in Canoga Park, the fix gets cheaper the sooner it starts. We inspect first, show you the evidence, quote it flat, and only recommend what the photos support. Call (844) 443-4582 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Canoga Park.