Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Calabasas
If your cap is loose, your crown is cracking, or you’re not sure either one is doing its job, we can help. Chimney Sweep Canoga Park installs, replaces and repairs chimney caps and crowns for homeowners throughout Calabasas, and we know how the housing here is built: tall two-story stacks, tight hillside lots, and more than one flue under a single cap. Our technicians have up to 15 years of experience, and every job starts with a look at what’s actually on your roof before anyone recommends a fix. Call (844) 443-4582 and we’ll set up a free estimate.
Why Calabasas Homeowners Call Chimney Sweep Canoga Park for Chimney Cap & Crown
Calabasas chimneys don’t fail the way flatland valley chimneys fail. Houses here went up mostly between the 1980s and the 2000s, clustered on hillside lots, and a lot of them carry several flues in a single tall stack. That changes what a cap and crown job actually is. It’s a sealing and separation question as much as a rain question, and it’s the kind of work we do regularly.
We hear from Calabasas homeowners who’ve been told by another contractor that something on the roof needs attention and want a straight answer, and from people who just bought a canyon-edge property and want to know what they’re working with. Our approach is the same either way: inspect first, explain what we find, and tell you plainly when a repair can safely wait. We connect you with a local pro who is licensed and insured as their state requires, and the written estimate sets the final price before any work begins.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Calabasas
Multi-Flue Cap Installation
A single low-profile cap over a multi-flue stack is one of the most common problems we see on Calabasas hillside homes. When one cap sits flat over several flues, wind-driven leaf litter and bird nesting pack the shared space between them, and that’s when a fireplace starts drafting smoke sideways or an appliance vent pushes exhaust toward the wrong side of the stack. We size and fit multi-flue caps so each flue draws independently, with enough height above the crown to clear debris and let exhaust rise.

Cap Replacement
Caps fail slowly here. Hot dry summers bake the sealant, wet winters work at the seams, and Santa Ana winds drive debris against the mesh until it rusts through or tears. We replace caps that have lost their screen or pulled loose from their mounting, and we fit spark arrestors that meet wildland-urban-interface ember expectations, not just a generic valley cap. If a bird has nested inside your cap, we clear it and check whether the cap itself is still sound before quoting a replacement.

Crown Repair and Rebuild
A chimney crown is the concrete cap at the very top that sheds water away from the flue and the masonry below it. On 1980s to 2000s hillside estates, crowns crack and spall under the hot-dry and wet-winter cycle, and once water gets into that gap it feeds first-degree creosote and rusts the damper from above. We rebuild crowns over new flashing ties where the original has broken down, and we repair smaller cracks before they spread. Sometimes the crown isn’t the real problem, and we’ll say so.

Crown Coating
When a crown is sound but showing surface wear, a proper crown coating can extend its life without demolition. It’s not a fix for a crown that’s already cracked through or separating from the flue, and we won’t sell it as one. We assess the crown first and tell you whether coating will hold or whether a rebuild is the honest answer.
Trusted Brands We Service in Calabasas
We install and service chimney caps and covers from Gelco and Famco, and we source professional-specification parts through Olympia Chimney Supply. That matters on a multi-flue job where a one-size cap won’t do: different flue diameters and stack layouts need a correctly sized product, not whatever’s closest on a shelf. We don’t stock parts on a truck or keep a warehouse. We order the right components for your stack and schedule the install once they’re in, so the job is done properly the first time rather than patched with a generic fit.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Calabasas Homes
The local combination here is specific: dense, relatively recent hillside estates with shared and adjacent multi-flue stacks, where caps and crowns have to stop cross-contamination between flues and meet ember-resistance expectations at the same time. That’s a combination flatland valley pages never address. What we actually find on Calabasas roofs:
- Debris bridging between flues. A single undersized cap over a multi-flue stack lets leaf litter and nesting pack the shared space, so one fireplace’s smoke or an appliance vent migrates into a neighbor’s flue. On a cluster of homes close together, that’s a real problem, not a cosmetic one.
- Cracked and spalling crowns on 1980s – 2000s estates. Hot dry summers and wet winters crack the crown, and Santa Ana winds push water and debris into the gap. That feeds first-degree creosote and rusts the damper from above.
- Standard caps without ember-arrestor mesh. On canyon-edge homes this falls short of WUI expectations, leaving the stack open to wind-blown embers and bird nesting that clogs the smoke chamber.
- Bird nesting in tall chimney caps. Common in canyon and hillside neighborhoods where wind-driven debris collects, and often the first thing a homeowner notices when smoke starts backing up.
Pricing for Chimney Cap & Crown in Calabasas, CA
We won’t quote a number over the phone without seeing the stack, because a single-flue cap on a tract home and a custom multi-flue cap on a canyon estate are different jobs. What we can tell you is roughly what each runs in the Calabasas market. A typical cap installation runs $250 – $600. A multi-flue or custom cap for a tall stack runs $450 – $1,200. Crown repair runs $350 – $800, and a full crown rebuild runs $900 – $2,000. Crown coating is the least expensive option where it’s appropriate, typically $250 – $500. These are estimates, and the written estimate we give you sets the final price. The visit and the estimate are free.
We Also Serve Cities Near Calabasas
We work across the west valley and the surrounding hills, including Hidden Hills, Woodland Hills, West Hills and Bell Canyon. The same dense multi-flue conditions and WUI ember expectations apply across these areas, and we bring the same approach everywhere we go: inspect first, size the cap correctly, and tell you honestly whether a crown needs a coating or a rebuild. If you’re just over the hill from Calabasas, we can help there too. For the full range of what we do, see our chimney cap & crown services.
Serving Calabasas, CA – Our Local Coverage Area
We serve Calabasas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Calabasas
Yes, if the cap is correctly sized and the flues are properly separated at the top. A single low-profile cap over a shared stack is exactly what causes cross-contamination, because it lets debris and nesting bridge between the flues. The fix is a properly sized multi-flue cap with enough height and separation that each flue draws on its own. We inspect the top of the stack before recommending anything, and we’ll tell you plainly whether your current cap is the culprit. Call (844) 443-4582 for a free estimate.
Yes. Canyon-edge homes sit in the wildland-urban interface, and a standard cap without ember-arrestor mesh falls short of WUI ember-resistance expectations. Wind-blown embers and bird nesting are both real concerns here in a way they aren’t on flatland valley chimneys. We fit spark arrestors rated for that exposure, sized to your stack. Call (844) 443-4582 and we’ll take a look.
It depends on how far the damage has gone. Surface wear and hairline cracking can often be handled with a proper crown coating. Once the crown has cracked through or separated from the flue, coating won’t hold and a rebuild over new flashing ties is the honest answer. We assess first and tell you which one you’re looking at. Call (844) 443-4582 for a free estimate.
Yes, and spring is a good time. The wet winter is when water gets into cracked crowns and damaged caps, so spring is when you’ll catch the damage before summer heat and dry brush season make it worse. Creosote and ember screens get attention before fire season here, not only in fall. We answer 24/7 and will book you in. Call (844) 443-4582.
Not always. Sometimes the nesting just needs clearing and the cap is sound. But if the bird got in, the mesh was either missing, torn, or loose enough to let it through, and that same gap lets wind-driven debris and embers in too. We check the cap and screen before quoting a replacement. Call (844) 443-4582 and we’ll tell you which it is.
Call (844) 443-4582. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the written quote sets the final price, and nothing gets recommended that you can’t verify yourself.
Written by the team at Chimney Sweep Canoga Park.