Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Fireplace Repair for Canoga Park Homeowners
A fireplace that smokes into the room, a damper that won’t close, or a pilot light that refuses to stay lit isn’t a problem you can put off through the cooler months. In Canoga Park’s older ranch homes, fireboxes and dampers have usually seen decades of use, and the wear shows up as cracked masonry, rusted metal, or a smell that lingers after the fire is out. Our technicians have up to 15 years of experience diagnosing exactly those problems, and we inspect before we recommend any repair. Call (844) 443-4582 and we’ll set up a visit, with same-day scheduling available in Canoga Park when the calendar allows. We answer 24/7 and offer fast dispatch from 7am to 7pm.
What Our Fireplace Repair Service Includes
Fireplace repair covers everything from the firebox floor to the smoke chamber. We work on gas and wood-burning units, inserts, dampers, and pilots, and we tell you what’s actually wrong before recommending anything. Here’s what each part of the job involves.
Gas Fireplace Repair
Gas fireplaces fail in fairly predictable ways: weak flames, a burner that won’t light evenly, soot on the logs, or a valve that sticks. Those symptoms usually trace back to a clogged burner orifice, a failing valve, or debris in the log set. We test the gas train, clean the burner, and check the seal around the firebox so the unit burns cleanly again.

Wood Burning Fireplace Repair
Wood-burning fireplaces take the most abuse because they handle real flame and creosote. Cracked firebrick, crumbling mortar joints, and a warped grate are common in Canoga Park homes that have burned wood for years. We rebuild damaged firebox masonry with refractory mortar and replace firebrick where the original has spalled, so the fire stays contained where it belongs.

Fireplace Insert Service
An insert sits inside the firebox and needs its own connection to the flue, plus a surround and blower that wear over time. When an insert runs poorly, the cause is often a loose flue connection, a failed blower, or a gasket that no longer seals. We service inserts of all makes, check the liner connection, and get the unit drawing and heating the way it was built to.

Damper Repair
The damper is the metal plate that opens and closes the flue, and a stuck or rusted one is one of the most common repairs we handle. A damper that won’t open lets smoke back into the room; one that won’t close lets heated air escape and cold air drop down the chimney when the fireplace is idle. We free, repair, or replace the damper and confirm it seals and moves smoothly.
Firebox Repair
The firebox is the chamber where the fire actually burns, so cracked or deteriorated masonry there is a real concern and not just cosmetic. Spalled firebrick, missing mortar, and gaps in the firebox walls let heat and gases reach materials that aren’t rated for them. We rebuild fireboxes with proper refractory materials and, where the flue tiles behind them are also failing, we can resurface with the HeatShield system rather than tearing everything out.
Pilot Light Repair
A pilot that keeps going out points to a dirty orifice, a weak thermocouple, or a draft problem pulling the flame away. Left alone, a pilot that won’t stay lit can let unburned gas accumulate, which is why we treat it as a priority call. We clean the assembly, test the thermocouple and safety shutoff, and confirm the pilot holds before we leave. Gas work is not a DIY job; a trained professional should handle anything involving the gas line or valve.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Fireplace Repair
We work with a curated set of professional-grade brands because the parts and materials behind a repair determine how long it lasts. HeatShield is a resurfacing system for restoring deteriorated flue tiles, and we use it to bring a failing flue back to a sound surface without full demolition. When a firebox or damper needs replacement parts, we source through Olympia Chimney Supply, a nationally recognized distributor of professional-specification chimney products, so what goes back into your fireplace is built for the job.
On the exterior side, our cap and crown work draws on Gelco and Famco, and those same brand relationships carry into fireplace repair when a chimney top needs attention alongside the firebox. We service equipment across these lines and know where each one tends to wear. Whether you have a HeatShield-resurfaced flue, a Gelco cap overhead, or any other make, we can help.
Signs You Need Fireplace Repair Right Now
Some symptoms can wait a short while and some shouldn’t. Here’s what to watch for and why each one matters.
- Smoke rolling into the room. A fireplace that smokes when it used to draw well usually has a damper, flue, or draft problem. It’s a sign the exhaust path is blocked or the damper isn’t opening fully, and it needs a look before the next fire.
- Cracked or crumbling firebrick. Breaks in the firebox masonry let heat and gases reach materials not rated for them. This is one of the repairs we treat with the most urgency, because the firebox is what keeps the fire contained.
- A damper that sticks or won’t seal. A damper that jams open wastes heat all winter, and one that jams shut makes the fireplace unsafe to light. Either way, it’s a small repair that prevents bigger trouble.
- A pilot light that won’t stay lit. On a gas unit, a pilot that keeps dying can allow gas to build up. Stop using the fireplace and have the assembly and safety shutoff checked by a trained professional.
- Soot stains or a lingering smoky smell. Black streaks above the firebox or a smell that stays after the fire is out point to poor draft or a leak. These often trace back to a flue or damper problem worth diagnosing before it worsens.
Our Fireplace Repair Process – Step by Step
We keep the process transparent so you understand what we find and why any repair is recommended. Here’s how a typical visit goes.
- 1
Inspection first. We examine the firebox, damper, flue, and (on gas units) the burner and pilot before touching anything. A camera lets us see inside the flue and document what’s there, so nothing is recommended on guesswork.
- 2
Clear findings, in plain language. We show you what we see and explain which problems are urgent and which can safely wait. You get a written estimate before any work begins, and the estimate sets the final price.
- 3
The repair itself. Depending on what we find, that might mean freeing a damper, rebuilding firebox masonry, resurfacing flue tiles with HeatShield, or replacing a thermocouple. We use professional-grade materials matched to the job.
- 4
Testing and verification. After the repair we test draw, check the damper movement, confirm the pilot holds, and make sure everything functions the way it should before we call it done.
- 5
A written record. You leave with documentation of what was found and fixed, useful if you’re selling the home or filing an insurance claim later.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Repair Cost in Canoga Park?
Fireplace repair in Canoga Park typically runs from about $150 for a minor damper adjustment up to $900 or more for firebox rebuilding, with most common repairs landing between $250 and $600. The final number depends on the scope of the damage, the materials required, and whether the flue needs resurfacing at the same time. A typical damper repair runs $150 – $350, pilot light and gas burner service runs $150 – $400, and firebox or firebrick repair runs $400 – $900 depending on how much masonry is involved. Flue resurfacing with HeatShield, when it’s needed alongside a firebox repair, adds to the total.
To avoid overpaying, ask for a written estimate before work starts and make sure the estimate itemizes the parts and labor. We won’t recommend a repair we can’t show you the evidence for, and we’ll tell you plainly when something can safely wait. The estimate is free, and the written estimate sets the final price. We answer 24/7 at (844) 443-4582; a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Fireplace Repair Near Canoga Park – Our Service Area
We handle fireplace repair across the west San Fernando Valley, including fireplace repair in neighboring Winnetka and West Hills, plus Woodland Hills, Chatsworth, Reseda, Porter Ranch, Northridge, and Tarzana. Homes in Hidden Hills, Bell Canyon, and Santa Susana are also within reach. Scheduling usually lands within a day or two, and same-day appointments are possible when the calendar allows. If you’re not sure whether your address is covered, call and we’ll confirm.
Serving Canoga Park, CA – Our Local Coverage Area
We serve Canoga Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fireplace Repair in Canoga Park
Fireplace repair is the work of fixing the components of a fireplace so it burns safely and draws correctly, covering the firebox, damper, gas burner, pilot, insert, and the flue behind them. It ranges from a small damper adjustment to rebuilding cracked firebrick or resurfacing worn flue tiles. We inspect first, then repair only what the inspection shows needs it. Call (844) 443-4582 for a free estimate.
Most fireplace repairs take a few hours, and a simple damper or pilot fix can be done in a single visit. Firebox rebuilding and flue resurfacing take longer, often a full day or a scheduled follow-up, because masonry needs time and the materials have to cure. We give you a realistic timeline in the written estimate before we start. Call us to talk through your situation.
Most fireplace repairs in Canoga Park run between $250 and $600, with minor fixes starting around $150 and firebox rebuilding reaching $900 or more. The written estimate sets the final price, and it’s free. Call (844) 443-4582 for an exact quote; estimates are free.
Yes, we service gas fireplaces, including burner cleaning, valve and pilot work, and log set and firebox checks. Gas work involves the gas line and safety shutoff, so it should always be handled by a trained professional rather than attempted yourself. If your pilot won’t stay lit or you smell gas, stop using the fireplace and call us. Reach us at (844) 443-4582.
Same-day fireplace repair in Canoga Park is often possible when the schedule allows, and we’ll tell you honestly what’s available when you call. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (844) 443-4582 to book.
We stand behind our repairs, and we use professional-grade materials from brands like HeatShield and Olympia Chimney so the fix lasts. Before we leave, we test the unit and confirm it works. Any questions about a repair we’ve done, call and we’ll make it right. Phone (844) 443-4582.
Clear the hearth and the area in front of the fireplace, move any logs or decor, and make sure we can reach the firebox and the gas shutoff if you have one. If you know the make of your fireplace or insert, have that handy; it helps us match parts. For a full inspection and sweep alongside the repair, our chimney sweep service covers the flue itself.
Schedule Your Fireplace Repair Service in Canoga Park Today
If your fireplace smokes, sticks, or won’t light the way it used to, one visit can tell you what’s actually wrong and what it takes to fix it. Call (844) 443-4582 to schedule fireplace repair in Canoga Park. We answer 24/7, we inspect before we recommend, and the estimate is free with no obligation. You’ll know what’s wrong and what it costs before any work begins.
Written by the team at Chimney Sweep Canoga Park.